Descrizione

zapco power specifications typical application
2 Channel Full range class A/B
Power @ 2Ω: 2x85watts, 1×170 watts
RMS Rated Power @ < 0.05% THD + noise @ 2Ω: 2 x 80 watts @ 4Ω: 2 x 50 watts @ 4Ω bridged: 160 watts More about Zapco Power Class A/B bridgeable 12V amplifier 2 channel bridgeable 12V amplifier Stable into 4 ohms bridged or 2 ohms stereo load THD + Noise <0.05% Singal to Noise Ratio >85dB
Channel Separation >60dB
Frequency Response 15Hz to 30KHz +/ 1dB
Input Sensitivity .25volts to 5volts
RCA Signal input and output connectors
4-way protection circuitry (thermal / over current / speaker short / DC)
Tested voltage & THD: 14.4V & less than 0.04%
Dimensions in Inches : 6.4(W) x 1.8(H) x 6.1(L)
The ST-2X puts out over 50 Watts RMS per channel x 2 at 4Ω, both channels driven at all frequencies at rated distortion. That’s plenty for 6″ or 6 x 9 co-ax’s, and for most 5.25″ or 6″ separates. With speaker level inputs you can also use it to add some serious punch to a factory stereo.
Other ST-X Series Models
MS