WordPress

Amplificatore finale di potenza Home Cinema MOON - MC 8/6

Amplificatore finale di potenza Home Cinema MOON – MC 8/6

$228,000,000.00

Amplificatore finale di potenza Home Cinema MOON – MC 8/6

Esaurito

COD: 1683
Category:

Descrizione

Available in configurations from 2 to 7 channels, the MOON MC-8 was designed with one overwhelming goal in mind: uncompromising reproduction of both the massive dynamics and awe inspiring sonics that accompany today's uncompressed multi-channel audio recordings (Blu-Ray). To accomplish this feat and the numerous engineering challenges that go with it, a whole new approach to the design of multi-channel amplification was required.

 

Relying on many technologies found in our highly-acclaimed Evolution Series power amplifiers, numerous physical and electrical constraints had to be overcome to create a multi-channel amplifier where all 7 channels would be capable of identically staggering performance. The result is theMOON MC-8 which can produce a maximum continuous power output of 250 watts per channel into 8 ohms, 500 watts per channel into 4 ohms and 1000 watts per channel into 2 ohms, generating a mind-numbing ultra-high-current output signal of 280 amperes spread across 7 channels. 
 
The MC-8 is leaps beyond anything else available, even our own MOON Titan. A quick listen will reveal a level of sound purity, sheer power and limitless dynamics that no other multi-channel power amplifier has ever been able to attain, let alone hint at. The MOON MC-8 is a genuine masterpiece, a technological tour-de-force, and a colossal achievement that has no equal. 
 
 

 
  
  Significant Design Features: 
 

· An enormous power supply featuring a proprietary toroidal transformer design that allows for
  astonishing dynamics from Blu-Ray soundtracks
· The world’s first and only multi-channel amplifier capable of simultaneously handling 7 channels
  of uncompressed audio without any dynamic compression
· Class “A” output to 5 watts for greater efficiency and refined sonics at typical listening levels
· Balanced differential circuitry
· Extremely fast circuitry for real-time amplification
· Modular circuit design using plug-in cards for the addition/removal of channels “in the field”
· Virtually non-existent intermodulation distortion
· Proprietary MOON Bipolar output transistors with unprecedented gain linearity resulting
  in improved bass response and even more accurate sonic reproduction
· A very high damping factor yielding extremely tight, accurate and fast reproduction of bass notes
· Ultra rigid chassis construction to minimize the effects of external vibrations
· Accurate matching of the highest quality electronic components
· RS-232 port for full custom external control
· 12 Volt trigger for remote operation
· Very short signal path for a faster transient response
· Requires a 220-240V AC power outlet
· Pure copper circuit board tracings with extremely low impedance characteristics
· Designed to remain powered up at all times for optimal performance
· Low operating temperature for an exceptionally long life.

 

 
Type Solid State
Configuration 2 to 7 channels
Power Supply Transformer 3.0kVA
Power Supply Capacitance 280,000µF
Class Of Operation A/AB
RCA Input 1 per channel
Balanced Input 1 XLR per channel
Input Impedance 24,900 Ω
Input Sensitivity 1420mV RMS
Output Device Type Bipolars – 8 per channel
Output Binding Posts WBT
Output Power @ 8 Ω 250 Watts
Output Power @ 4 Ω 500 Watts
Frequency Response 10Hz – 100kHz   +0/-3dB
Output Impedance 0.01 Ω
Damping Factor (static) 800
Gain 29dB
Signal-to-noise Ratio 105dB @ full power
Maximum Output Voltage 42 Volts
Slew Rate 80V/µs
Maximum Current 280 amperes
Crosstalk @ 1kHz < -90dB
Intermodulation Distortion Unmeasureable
THD   (20Hz – 20kHz @ 1 watt) < 0.02 %
THD   (20Hz – 20kHz @ 250 watts) < 0.05 %

 

12 Volt Trigger Operation 
 
 		 Direct Logic   (0V = off, 12V=on)   using a 
1/8" mini-jack with an input impedance of 
1k Ω and current requirement of 12mA

 

Available Faceplate Finishes Black and Silver
Power Consumption @ idle 85 Watts
AC Power Requirements 220-240V / 60Hz     240V / 50Hz
Fuse Replacement long fast blow – 10A   (3AG)
Net weight 170 lbs / 76 Kgs
Shipping weight 240 lbs / 108 Kgs
Dimensions   (W x H x D) 17.4 x 13.4 x 21.0 in.   (44.2 x 34.0 x 53.3 cm.)

    Features & specifications are subject to change without notice.

D.G.

 

Informazioni aggiuntive

Peso 88 kg

Prodotti correlati