Il tuo carrello è attualmente vuoto!
AMPLIFICATORE FINALE MULTICANALE CLASSÈ CT-5300
AMPLIFICATORE FINALE MULTICANALE CLASSÈ CT-5300
Finale di potenza a 5 canali ad alta corrente. 5 x 300W su 8 ohm. Circuitazione bilanciata a simmetria complementare. Dispositivi j-fets per l’ingresso, mosfet per i driver e transistor bipolari per gli stadi di uscita. Trasformatore toroidale. Ingresso RCA e XLR. RS-232. Trigger IN/OUT. Controllo IR IN/OUT. RJ45 per bus dati. Tecnologia ICTunnel per migliorare il raffreddamento nel montaggio a rack.
All tests un-weighted and 500kHz measurement bandwidth (except SNR). |
||
Frequency response |
1Hz – 80kHz, -3dB |
|
Output power |
300W rms into 8Ω (24.8 dBW) |
|
Harmonic Distortion |
<0.002% at 1 kHz balanced |
|
Peak Output Voltage |
167V peak to peak, 53V rms no load |
|
Input Impedance |
50kΩ balanced / single ended |
|
Voltage gain |
29dB balanced / single ended |
|
Input level at clipping |
2.1V rms balanced / single ended |
|
Intermodulation |
>90dB below fundamental into >85dB below fundamental into |
|
Signal to Noise Ratio |
-116dB at peak output into 8Ω |
|
Output impedance |
0.03Ω @ 1kHz |
|
Standby power |
6W @ 120V; 7W @ 230V |
|
Rated power |
1300W @ 1/8th power into 8Ω |
|
Width |
19” (483mm) (including faceplate) |
|
Width |
17” (432mm) (excluding faceplate) |
|
Depth |
23.625” (569mm) (excluding connectors) |
|
Height |
8.75” (221mm) |
|
Gross weight |
140lbs (59.5kg) |
|
Net weight |
113lbs (51.25kg) |
|
Mains voltage |
Specified on rear panel |
*specifications for output into 4 ohms are omitted because the AC Mains/power supply cannot support all channels driven simultaneously at this level, which would require over 5,000W and only occur under a special test condition.
Peso | 60 kg |
---|