Descrizione

The 10W1v2 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.34 in. / 110 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio’s proprietary technologies enhance its performance and reliability.
The 10W1v2-8 is best used with amplifier power in the 75W – 300W range and is optimized to operate in a compact 0.625 cu. ft. (17.7 l) sealed enclosure, or a 1.0 cu. ft. (28.3 l) ported enclosure. Detailed enclosure recommendations can be found in the “Specifications” tab.
Continuous Power Handling (RMS) 300 W
Recommended RMS Amplifier Power 75 – 300 W
Nominal Impedance (Znom) 8 Ω
Free Air Resonance (Fs) 26.52 Hz
Electrical “Q” (Qes) 0.472
Mechanical “Q” (Qms) 6.115
Total Speaker “Q” (Qts) 0.438
Equivalent Compliance (Vas) 1.735 cu ft / 49.10 L
One-Way Linear Excursion (Xmax)* 0.375 in / 10 mm
Reference Efficiency (no) 0.1900%
Efficiency (1 W / 1 m)** 84.67 dB SPL
Effective Piston Area (Sd) 53.522 sq in / 0.0345 sq m
DC Resistance (Re) 6.671 Ω
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.
MS